Abrasives Technology
Do you know why superthin cutting discs be so thin ???
Superthin cutting discs is one kind resin bonded cutting discs with very thin thickness ( normally from 0.8~1.9mm) and ideal for non-burr & fast cut off applications.
BLUESHARK concentrate on superthin cutting discs technology since 8 years before and nowdays we manufactures a wide selection of high performance T41 /42 Superthin Cutting Discs to suit all needs from low purchase price to highest level of performance attainable and ceramic line All-in- One superthin cutting discs is ours newest generation products.
We trust everyone used or ready using superthin cutting discs will thinking the same question: Why so thin ??
1) Extra Fast & Sharp cutting performance
Thinner design minimizes the surface area contact between the material and the wheels for faster, cleaner cuts. This is the No.1 reason why make thinner. Also the small contact area will bring less noise & dust with comfortable hand feeling and we called " Happy-Cutting".
2) Safety
In most people views, the discs be thinner seems not so safety as those with bigger thickness. But the truth is the thinner cutting discs sometimes will be more safe than thicker ones especially when cut off hard-cutting materials. Why??? the reason is the thicker ones will face bigger resistance & frictional forces than thinner ones. All of BLUESHARK superthin cutting discs fully reinforced with two fiberglass mesh on both side for added safety and controlled performance even 0.8mm thickness.
3) Save Cost
The superthin cutting discs with faster cutting ability than normal ones and will save much of your labor cost. The another hand is they can reduce your work-piece's waste. Suppose you will cut off 10,000 times per year, if using the 3mm thickness normal cutting discs, means the waste work-piece is 10,000 x 3.0mm = 30,000mm=30M, but if using 1.00 thickness superthin cutting discs, the waste will reduce to 10,000 x 1.0mm = 10M. Now you must know why so thin even your work-piece is not the expensive ones.
4) Avoid work-piece over heating
Some work-pieces have high requirments of surface color during cutting. Superthin cutting discs cooling cutting ability can max avoid this problem.
Anyway, superthin cutting discs play a non-replaced role in nowdays abrasives industrial and BLUESHARK will always running on the new technology exploration just like the rotation superthin cutting discs!!!
